Seamless Precision Steel Tubes

Seamless Precision Steel Tubes
Details:
According to DIN 2391-2
Send Inquiry
Description
Send Inquiry

Yosun (Tianjin) Piping Engineering Co., Ltd. is one of the most credible manufacturers and suppliers of seamless precision steel tubes in China. Please feel free to wholesale customized seamless precision steel tubes at competitive price from our factory. If you have any enquiry about quotation, please feel free to email us.

 

々Steel grades

 

Quality grade Steel grade Previous designation used in Germany
as in DIN EN 10027 Part 1 as in DIN EN 10027 Part2
A

S215GSiT

S215GAIT

S235G2T

S255GT

S355GT

1.0211

1.0212

1.0308

1.0408

1.0580

St 30Si

St 30AI

St 35

St 45

St 52

C All grades as for quality grade A, and any other steel ggrades.

 

 

々Chemical composition of steel grades shown on ladle analysis

 

Steel grade Chemical composition of steel grades shown on ladle analysis
Symbol Material number C max. Si max. Mn P max. S max.
St 30 Si 1.0211 0.10 0.30 ≤0.55 0.025 0.025
St 30 AI 1.0212 0.10 0.05 ≤0.55 0.025 0.025
St 35 1.0308 0.17 0.35 ≥0.40 0.025 0.025
St 45 1.0408 0.21 0.35 ≥0.40 0.025 0.025
St 52 1.0580 0.22 0.55 ≤1.60 0.025 0.025
The following alloying elements may be added:Nb :≤ 0.03%;Ti:≤0.03%;V: ≤0.05%;Nb+Ti+V:≤0.05%.

 

々 Mechanical properties of tubes at ambient temperature

 

 

Steel grade Final supply condition Cold finished(hard)(BK) Cold finished (soft)(BKW) Cold finished and stress-relieved(BKS) Annealed (GBK) Normalized(NBK)
Material designation Material number Min tensile strength,Rm,in N/mm2 Min elongation at fractura,As,as a parcentage Min tensile strength,Rm,in N/mm2 Min elongation at fracture,As,as a percentage Min tensile strength,Rm,in N/mm2 Min yield strength,Rm,in N/mm2 Min elongation at fracture,As,as a percentage Min tensile strength,Rm,in N/mm2 Min yield strength,Rm,in N/mm2 Tensile strength,Rm,in N/mm2 Min yield strength,Rm,in N/mm2 Min elongation at fracture,As,as a percentage
St 30 Si 1.0211 430 8 380 12 380 280 16 280 30 290 to 420 215 30
St 30 AI 1.0212 430 8 380 12 380 280 16 280 30 290 to 420 215 30
St 35 1.0308 480 6 420 10 420 315 14 315 25 340 to 470 235 25
St 45 1.0408 580 5 520 8 520 375 12 390 21 440 to 570 255 21
St 52 1.0580 640 4 580 7 580 420 10 490 22 490 to 630 355 22

1) The yield sgrength for the annealed(GBK) condition shall be equal to at least 50% of the tensite sgrength.Depending on the extent of deformation,the yield sgrength of tubes supplied in the cold finished(hard)(BK) and cold finished(soft)(BKW)conditions,may come close to reaching the tensile sgrength.Calculations should be based on a minimum value of 80% of the tensile sgrength for the cold finished(hard)condition and of 70% for the cold finished(soft) condition. 

2) For tubes with an ouside diameter of up to 30 mm and a wall thickness up to 3 mm,the minimum yield sgrength may be 10N/mm2 lower.

     

 

Hot Tags: seamless precision steel tubes, China seamless precision steel tubes manufacturers, suppliers, 1045 steel tubing, Carbon Steel Pipe for Fluid Delivery, Pipe of pressure purpose, Carbon Steel Pipe for Beverage Industry, Carbon Steel Pipe for Pressure Vessels in Oilfields, TUBE A192

Send Inquiry