Tensile requirements

Oct 27, 2025

Leave a message

Grade A Tensile strength,min ksi[MPA] Yield point,min ksi[MPA] Elongation in 2 in.[50 mm],min,%B Reduction of Area,min,&

grade U-60-30

[415-205]

60[415] 30[205] 22 30

grade 60-30

[415-205]

60[415] 30[205] 24 35

grade 65-35

[450-240]

65[450] 35[240] 24 35

grade 70-36

[485-250]

70[485] 36[250] 22 30

grade 70-40

[485-275]C

70[485] 40[275] 22 30

A Specify Class 1 or Class 2 in addition to grade designation[see 9.2].

B When ICI test bars are used in tensile testing as provided for in this specification,the gage length to reduced section diameter ratio shall be 4 to 1.

C Grade 70-40[485-275] may be used to meet the requirement of Grade 70-36 [485-250],when agreed upon between the manufacturer and the purchaser.

 

Send Inquiry