-
![Forged Slip On Flange]()
Forged Slip On FlangeA slip-on flange is connected to the pipe or the fittings by two fillet welds, one executed inside and one outside the cavity of the flange. Slip-on flanges are also defined Hubbed Flanges and they -
![Gray Iron Casings For Pipe Fitting]()
Gray Iron Casings For Pipe FittingAccording to ASTM A126 -
![Cast Iron Soil Fitting]()
Cast Iron Soil FittingAccording to ASTM A 74 -
![Transportation Systems-Flange]()
Transportation Systems-FlangeAccording to ISO 15590-3-2004 -
![Steel Pipe Flanges]()
Steel Pipe FlangesAccording to JIS B 2220-2004 -
![Elbow of wrought carbon steel and alloy steel for low-temperature service]()
Elbow of wrought carbon steel and alloy steel for low-temperature serviceGrade name:WPL6/WPL9/WPL3/WPL8 -
![Integral Pipe Flange]()
Integral Pipe FlangeIntegral flanges, also known as Long Weld Neck (LWN) flanges, materials are carbon steel, stainless steel, alloy steel and so on. In various domestic standards, IF is used to indicate the integral -
![Flange Spectacle Blind]()
Flange Spectacle BlindBlind flange, also known as blind flange. It is a connection form of flange. It's basically a flange without a hole in the middle. One of its functions is to block the end of the pipeline, and the -
![Forged Welding Neck Flange]()
Forged Welding Neck FlangeForged Welding Neck flange refers to a flange with a cone neck and butt welded with a cylinder or pipe. It belongs to the integral flange. Due to the excessive structure of the cone neck and the butt -
![Socket Weld Flange]()
Socket Weld FlangeSocket welding flange refers to the pipe end inserted into the flange ring ladder, welded in the pipe end and the outer flange. There are two types with and without a neck. The rigidity of the flange -
![Reducing Flange]()
Reducing FlangeReducing flange, also known as the size head flange or reducing flange, the inner diameter size and the standard flange inner diameter size there is a certain difference, is a diameter change of the -
![Stainless Steel Pipe Flanges]()
Stainless Steel Pipe FlangesAccording to A182/A182M − 15
Tami Ambriz
Alberta Martinez
Jan Schrecengost
Phyllis Worthington
Shelly Walker
Ruth McAtee
Blind-Flange Valves Zero Leakage Spectacle Line Blind Valve For Gas Blind plate valve is a gate valve that cuts off the gas medium by hand, electric or pneumatic or hy... Inquire Now Products...
PRODUCT FEATURES: Block One Side of the Flange While Venting the Other Side Verify the Amount of Pressure in the Line Mitigate Line Pressure Entry Point for Hydrotesting Testing Point for...
The Blind Flange Valve was designed and produced in the city of Fredrikstad from the 1960s and is still to this date supplied from a Fredrikstad company through Langthon Maritime to all over...
Line Blind Valve Models, Figure Numbers and Features Easy operation, trouble-free service. When closed no liquid or gas can leak to the ... The Classic Double Block & Bleed Line Blind Valve Several...
Blind flange dimensions are covered in ASME B16.5 – which covers Pipe Flanges and Flanged Fittings for size NPS ½” to 24” for above NPS 26” to 60” it should be as per ASME B16.47. During the...
Angle Valve 0 Ball Valve 0 Blind Flange 9 Check Valve 0 Cock Valve 0 Cock Wrench 0 Deck Hatch Drain Valve 0 Double Flanged Type 0 Duo Check Valve 0 Expansion Joint 0 Foot Valve 0 Gate...