-
![Integral Pipe Flange]()
Integral Pipe FlangeIntegral flanges, also known as Long Weld Neck (LWN) flanges, materials are carbon steel, stainless steel, alloy steel and so on. In various domestic standards, IF is used to indicate the integral -
![Alloy Steel Forgings]()
Alloy Steel ForgingsAccording to A336/A336M − 15 -
![Transportation Systems-Flange]()
Transportation Systems-FlangeAccording to ISO 15590-3-2004 -
![Steel Pipe Flanges]()
Steel Pipe FlangesAccording to JIS B 2220-2004 -
![Piping Fittings Of Wrought Carbon Steel And Alloy Steel For Moderate And High Temperature Service]()
Piping Fittings Of Wrought Carbon Steel And Alloy Steel For Moderate And High Temperatu...Grade name：WPB/WPC/WP1/WP12/WP11/WP22/WP24/WP5/WP9/WPR/WP91/WP911/WP92 -
![Flange Spectacle Blind]()
Flange Spectacle BlindBlind flange, also known as blind flange. It is a connection form of flange. It's basically a flange without a hole in the middle. One of its functions is to block the end of the pipeline, and the -
![Forged Welding Neck Flange]()
Forged Welding Neck FlangeForged Welding Neck flange refers to a flange with a cone neck and butt welded with a cylinder or pipe. It belongs to the integral flange. Due to the excessive structure of the cone neck and the butt -
![Forged Slip On Flange]()
Forged Slip On FlangeA slip-on flange is connected to the pipe or the fittings by two fillet welds, one executed inside and one outside the cavity of the flange. Slip-on flanges are also defined Hubbed Flanges and they -
![Socket Weld Flange]()
Socket Weld FlangeSocket welding flange refers to the pipe end inserted into the flange ring ladder, welded in the pipe end and the outer flange. There are two types with and without a neck. The rigidity of the flange -
![Reducing Flange]()
Reducing FlangeReducing flange, also known as the size head flange or reducing flange, the inner diameter size and the standard flange inner diameter size there is a certain difference, is a diameter change of the -
![Pressure Vessel Components]()
Pressure Vessel ComponentsAccording to A266/A266M − 13 -
![Stainless Steel Pipe Flanges]()
Stainless Steel Pipe FlangesAccording to A182/A182M − 15
Dianne Wynn
John Snyder
Archie Baumgart
Rosie Larsen
Douglas Mixon
Jose Dailey
Sep 20, 2017 · The most common flange finish for ASME B16.5 RF flanges is 125 to 250 micron Ra (3 to 6 micron Ra). The raised face is, according to ASME B16.5, the default flange face...
Jul 28, 2018 · The SO flanges have the RF with a concave in the center. The concave has the bigger inner diameter than the outer diameter of pipe, so that pipes are able to be inserted into...
This is to keep the thin, bittle cast iron flange from being sprung into the gap caused by the raised face of the carbon steel flange. Ring-Type Joint (RTJ) The Ring Type Joint flanges are typically...
Flat Face Flange. Flat face (FF) flanges are similar to the RF flanges, but they do not have the raised area like the RF flange. Instead, the whole surface is flat. That means that the gasket used...
Jul 31, 2019 · July 31, 2019 Technical Drawing A typical drawing of Class 150 slip on flange with raised face (RF) conforming to ASME B16.5 Machine bolt with nut, and stud bolt with nuts for...
ansi b16.5 ½” – 24” forged flange weight chart; ansi b16.47 series a flanges; ansi b16.47 series b flanges; ansi b16.47 note; ansi b16.1 industry standard; boiler code flanges; ......