-
![Flange Spectacle Blind]()
Flange Spectacle BlindBlind flange, also known as blind flange. It is a connection form of flange. It's basically a flange without a hole in the middle. One of its functions is to block the end of the pipeline, and the -
![Steel Alloy Forgings]()
Steel Alloy ForgingsThis standard is issued under the fixed designation A372/A372M.This specification covers relatively thin-walled forgings for pressure vessel use.Three types of carbon steel and six types of alloy -
![Transportation Systems-Flange]()
Transportation Systems-FlangeAccording to ISO 15590-3-2004 -
![Steel Pipe Flanges]()
Steel Pipe FlangesAccording to JIS B 2220-2004 -
![Elbow of wrought carbon steel and alloy steel for low-temperature service]()
Elbow of wrought carbon steel and alloy steel for low-temperature serviceGrade name:WPL6/WPL9/WPL3/WPL8 -
![Integral Pipe Flange]()
Integral Pipe FlangeIntegral flanges, also known as Long Weld Neck (LWN) flanges, materials are carbon steel, stainless steel, alloy steel and so on. In various domestic standards, IF is used to indicate the integral -
![Forged Welding Neck Flange]()
Forged Welding Neck FlangeForged Welding Neck flange refers to a flange with a cone neck and butt welded with a cylinder or pipe. It belongs to the integral flange. Due to the excessive structure of the cone neck and the butt -
![Forged Slip On Flange]()
Forged Slip On FlangeA slip-on flange is connected to the pipe or the fittings by two fillet welds, one executed inside and one outside the cavity of the flange. Slip-on flanges are also defined Hubbed Flanges and they -
![Socket Weld Flange]()
Socket Weld FlangeSocket welding flange refers to the pipe end inserted into the flange ring ladder, welded in the pipe end and the outer flange. There are two types with and without a neck. The rigidity of the flange -
![Reducing Flange]()
Reducing FlangeReducing flange, also known as the size head flange or reducing flange, the inner diameter size and the standard flange inner diameter size there is a certain difference, is a diameter change of the -
![Pipe Reducing Elbow]()
Pipe Reducing ElbowReducing elbow is a pipe member whose design center line curvature radius is different from the inner diameter of the straight pipe at both ends. This allows it to connect pipes of different sizes in -
![Stainless Steel Pipe Flanges]()
Stainless Steel Pipe FlangesAccording to A182/A182M − 15
John Russell
Lisa Hunt
Stephen Castillo
Ernesto Boyd
Sally Porter
Marti Marks
WebLap Joint Flange. A lap joint flange very much similar to a slip-on flange but is typically a two-piece flange of which one piece is called a Stub End and second piece is called a Hub. The...
WebLap joint flange Manufacturer Metal Industries Loose Flange, LJ Flange, loose hubbed flange in forged steel, loose plate flange, Stainless Steel, AS,CS etc. include class150, calss300, class600,...
WebFittings — Flange Adapters — Lap Joint Flanges — Straights. Part #. Body Material. Connection 1 Size. Connection 1 Type. Connection 2 Size. Connection 2 Type. SS-10M0-1-0005. 316 Stainless Steel....
WebA lap-joint flange is a two-component assembly, with a stub end that has a lap-joint ring flange placed over it. The stub end is then butt welded to the pipe, and the flange ring can be rotated to...
WebThe type B stub end is used for standard slip on flanges as lap flanges. The lap thickness on these short ends is greater than or equal to the nominal thickness of pipe wall. Also, the outer...
WebLap Joint Flange: Lap Joint Flanges (LJ Flanges) are used on piping fitted with lapped pipe or with lap joint stub ends the combined initial cost of the two items being approximately one-third...