Heat Treatment And Hardness Requirements

Heat Treatment And Hardness Requirements
Details:
According to A269/269M
Send Inquiry
Description
Send Inquiry

Yosun (Tianjin) Piping Engineering Co., Ltd. is one of the most credible manufacturers and suppliers of heat treatment and hardness requirements in China. Please feel free to wholesale customized heat treatment and hardness requirements at competitive price from our factory. If you have any enquiry about quotation, please feel free to email us.

 

[Heat treatment]

 

1.All material shall be furnished in the solution heattreated condition.Except as provided in 6.2,the heat-treatment procedure shall consist pf heating the material to minimum temperature or temperature range as specified for the grade in Table 2,followed by quenching in water or rapidly cooling by other means.Alternatively,for swamless tubes,immediateely following hot forming while the temperature of the tubes is not less than the specified minimum solution treatment temperature,tubes may be individually quenched in water or rapidly cooled by other means.

 

2.Controlled structural or special service characteristics shall be specified as a guide for the most suitable heat treatment.If the final heat treatment is at a temperature under 1900 °F[1040 ℃] and is so specified on the order,each tube shall be stenciled with the final heat treatment temperature in degrees Fahrenheit [degrees Celsius] after the suffix'' HT''.

 

3.A solution annealing temperature above 1950°F[1065 ℃] may impair the resistance to intergranular corrosion after subsequent exposure to sensitizing conditions in TP321,TP347,and TP348.When specified by the purchaser,a lower temperature stabilization or re-solution anneal shall be used subsequent to the initial high temperature solution anneal (see Supplementary Requirement S3).

 

TABLE 2 Heat Treatment and Hardness Requirements

 

Grade UNS Number Austenitizing Temperature,min or range °F[℃] Hardness,max
TP201 S20100 1900[1040]

220 HBW/230 HV or 96 HRB

TP201LN S20153 1900[1040] 250 HBW/263 HV or 100 HRB
TP304 S30400 1900[1040] 192 HBW/200 HV or 90 HRB
TP304L S30403 1900[1040] 192 HBW/220 HV or 90 HRB
TP304LN S30453 1900[1040] 192 HBW/200 HV or 90 HRB
TP316 S31600 1900[1040] 192 HBW/200 HV or 90 HRB
TP316L S31603 1900[1040] 192 HBW/200 HV or 90 HRB
TP316N S31653 1900[1040] 192 HBW/200 HV or 90 HRB
... S31655 1900[1040] 256 HBW or 100 HRB
TP317 S31700 1900[1040] 192 HBW/220 HV or 90 HRB
... S31730 1900[1040] 192 HBW/200 HV or 90 HRB
TP321 S32100 1900[1040] 192 HBW/200 HV or 90 HRB
TP347 S34700 1900[1040] 192 HBW/200 HV or 90 HRB
TP348 S34800 1900[1040] 192 HBW/200 HV or 90 HRB
TPXM-10 S21900 1900[1040] 269 HBW/285 HV or 25 HRC
TPXM-11 S21904 1900[1040] 269 HBW/285 HV or 25 HRC
TPXM-15 S38100 1900[1040] 192 HBW/200 HV or 90 HRB
TPXM-19 S20910 1900[1040] 269 HBW/25 HV or 25 HRC
TPXM-29 S24000 1900[1040] 265 HBW/270 HV or 100 HRB
... S31254 2100[1150] 220 HBW/230 HV or 96 HRB
... S31266 2100[1150] 250 HBW/263 HV or 100 HRB
... S31725 1900[1040] 192 HBW/200 HV or 90 HRB
... S31726 1900[1040] 192 HBW/200 HV or 90 HRB
... S31727

1975-2155

[1080-1180]

192 HBW/200 HV or 90 HRB
... S32053

1975-2155

[1080-1180]

192 HBW/200 HV or 90 HRB
... S30600 1900[1040] 192 HBW/200 HV or 90 HRB
... S32654 2100[1150] 250 HB/263 HV or 100 HRB
... S34565

2050-2140

[1120-1070]

265 HBW/270 HV or 100 HRB
... S35045 2000[1095] 192 HBW/200 HV or 90 HRB
... N08367 2025[1110] 265 HBW/270 HV or 100 HRB
... N08925

2010-2100

[110-1150]

217 HBW or 95 HRB
... N08926 2010[1100] 265 HBW/270 HV or 100 HRB
... N08904 2000[1100] 192 HBW/200 HV or  90 HRB

 

Hot Tags: heat treatment and hardness requirements, China heat treatment and hardness requirements manufacturers, suppliers, Stainless Steel Pipes, Amendments supplements To ASTM A312, Heat Treatment And Hardness Requirements, Welded Large Diameter Austenitic Steel Pipe, Welded Austenitic Steel Boiler, Seamless And Welded Tubing

Send Inquiry