Yosun (Tianjin) Piping Engineering Co., Ltd. is one of the most credible manufacturers and suppliers of electric-fusion-welded in China. Please feel free to wholesale customized electric-fusion-welded at competitive price from our factory. If you have any enquiry about quotation, please feel free to email us.
Ends
1.Pipe shall be furnished with a plain right-angle cut or with bevel ends as specified.All burrs at the ends of pipe shall be removed.
2.Unless otherwise soecified,pipe with beveled ends shall meet the requirements of ANSI B 16.25.
3.Unless otherwise specified,the outside circumference of pipe ends for a distance of not less than 4 in.[100 mm] shall nooy vary more than ±60% of the nominal wall thickness of the pipe from the nominal outside circumference based on the diameter specified,except that the tolerance shall not be less than ±3/16 in.[5 mm].
4.By agreement between the manufacturer and the purchaser the ends of the pipe may be sized within agreed-upon tolerances if necessary to meet the requirements of special installations.
Finish
1.Repair by welding----The welding of injurious defects in the pipe wall,provided their deoth does not exceed one third the specified wall thickness,will be permitted.Defects in the welds,such as sweats or leaks,shall be repaired or the piece rejected at the option of the manufacturer.Repairs of this nature shall be made by completely removing the defect,cleaning the cavity,and then welding.
2.All repaired pipe shall be tested hydrostatically in accordance with Section 11,unless otherwise specified in 11.3.
Hot Tags: electric-fusion-welded, China electric-fusion-welded manufacturers, suppliers, Carbon Steel Pipe for Fluid Dynamics Systems, Electric Fusion Welded Steel Pipe, Fluid Transfer Welded Steel Pipe, cs pipe, Carbon Steel Pipe for Refining Systems, mild steel tubing suppliers

