Stainless Chromium-Nickel Steel-Clad Plate

Stainless Chromium-Nickel Steel-Clad Plate
Details:
According to A264 − 12
Send Inquiry
Description
Send Inquiry

Yosun (Tianjin) Piping Engineering Co., Ltd. is one of the most credible manufacturers and suppliers of stainless chromium-nickel steel-clad plate in China. Please feel free to wholesale customized stainless chromium-nickel steel-clad plate at competitive price from our factory. If you have any enquiry about quotation, please feel free to email us.

 

Materials and Manufacture

1 Process:
1.1 The steel shall be made by the open-hearth, electricfurnace, or basic-oxygen processes, or by secondary processes whereby steel made from these primary processes is remelted using, but not limited to electroslag remelting or vacuum-arc remelting processes.
1.2 The alloy-cladding metal may be metallurgically bonded to the base metal by any method that will produce a clad steel that will conform to the requirements of this specification.
1.3 For explosively bonded products, the alloy cladding metal may be comprised of two or more separate alloy plates or sheets completely welded together to form a single fabricated component.
2 Heat Treatment:
2.1 Unless otherwise specified or agreed upon between the purchaser and the manufacturer, all austenitic stainless steel clad plates shall be given a heat treatment consisting of heating to the proper temperature for the solution of the chromium carbides in the cladding followed by individual air cooling. For base metals of air-hardening low-alloy steels the above heat treatment shall be followed by a tempering treatment. In the case of clad plate manufactured without hot rolling, the base metal and alloy cladding components may be heat treated separately as appropriate prior to bonding.
2.2 Duplex stainless steel clad plates shall be provided in a heat treated condition as agreed upon between the purchaser and the manufacturer.
2.3 When plates are to be cold formed, or when otherwise required by the base metal specification, the purchaser may specify that such plates, following solution annealing, be heat treated for grain refinement of the base metal by normalizing and either air cooled or water quenched as appropriate.

Test Specimen and Method of Making Shear Test of Clad Plate

product-430-405

 

Standard Rectangular Tension Test Specimen with 8-in. Gage Length

product-469-303

NOTE1-When necessary, it is permissible to use a narrower specimen, but in such a case the reduced portion shall be not less than 1 in. in width.
NOTE2-Punch marks for measuring elongation after fracture shall be made on the flat or on the edge of the specimen and within the parallel
section; either a set of nine punch marks 1 in. apart, or one or more sets of 8-in. punch marks may be used.
NOTE3-The dimension t is the thickness of the test specimen as provided for in the applicable material specifications.

Standard Round Tension Test Specimen with 2-in. Gage Length

product-417-324

 

 

 

Hot Tags: stainless chromium-nickel steel-clad plate, China stainless chromium-nickel steel-clad plate manufacturers, suppliers, Requirements For Steel Plates, Heat Treatment, Steel Plate, Low Tensile Strength Carbon Steel Plates, Approximate Mechanical Properties, Hot Rolled Steel Plate

Send Inquiry